Flex Radio 6500 Signature Series SDR
Ingersoll

EQUIPMENT REFERENCE
Curated equipment dataSpecs
- Receive frequency coverage
- 30 kHz to 77 MHz Reference
- Transmit frequency coverage
- 160 m–6 m (amateur bands only by country) + MARS; transverter IF output port: 100 kHz–77 MHz Reference
- Modes
- A1A (CW), A3E (AM), J3E (SSB), F3E (FM) Reference
- RF output power
- 100 W CW/SSB/FSK/FM; 25 W AM at 13.8 VDC nominal Reference
- Audio output power
- Headphone output: 21 mW into a 16-ohm minimum load; external powered-speaker output: 2.6 Vpp maximum into 10 kOhm Reference
- Power requirement
- +13.8 VDC ±15% Reference
- Current consumption
- 2 A receive typical; 23 A transmit maximum Reference
- Frequency stability
- 0.5 ppm TCXO; with GPSDO option, 5 × 10^-12 over 24 hours Reference
- Dimensions
- With feet: 13 in W × 12 in D × 4 in H (33 cm × 30.5 cm × 10.2 cm); without feet: 13 in W × 12 in D × 3.5 in H (33 cm × 30.5 cm × 8.9 cm) Reference
- Weight
- 13 lb (5.9 kg) Reference
- Antenna impedance
- 50 ohms, unbalanced Reference
- Sensitivity
- Typical MDS in 500 Hz bandwidth, preselector off: −121 dBm / −125 dBm / −136 dBm with preamp off / 10 dB / 20 dB; 30 dB preamp: not applicable Reference
Specifications may vary by revision or market. Use linked manufacturer references when available and confirm critical details before purchase.
About this listing
In excellent condition, Flex Radio 6500. Version 3.0 firmware with smart link credentials. Auto tuner, 100 watt, 160 to 6 meters SDR radio. Fantastic front end filters and software to set up razor sharp band edges.